Dubai Solar Energy and Solar Power Inverter
DuSense introduce our own range of Solar Powered Products to the Middle East market. Developed and manufactured under full ISO 9001 Quality Assurance procedures we are confident in the reliability and performance of our Solar Powered range. We can supply complete energy solutions for any of your requirements.
From complete Solar Air Condition System to Solar Street lighting systems – we can provide you with the complete solution. All systems provided with minimum 2 years manufacturers warranty and fully supported by makers on-site service support team.
Beijing Ministry of Railways Command and Control Center
Beijing Ministry of Railways Command and Control center is located in the west side of Ministry of Railways yard for railway passenger dedicated line. There are 4 floors on the ground and two floors underground with total floor area 34488 m2. The northern elevations of building is 82.05 m long totally, and western elevation is 84.6 m long. North part of building main part is 25.35 m high, and south part is 25.50 m high.
Ougan participated in the bi-directional static load test of 3 piles with 2 m diameter and 4000 ton ultimate load capacity successfully.
DuSense LLC was established in Dubai UAE July 2014 by Mike Shaw, a UK Instrumentation Technologist with more than 40year’s experience of major construction and oil and gas projects worldwide, Mike’s broad project background enables the business to provide customers with highly professional level of support for your measurement and monitoring requirements.0 comments
Vibrating Wire Concrete Embedment Strain Gauge - DuSense LLC0 comments
Vibrating Wire Strain Gauge Sister Bars - DuSense LLC0 comments
Super Cell is a NEW GENERATION of Hydraulic Load Testing Equipment using innovative design technology to develop the Civil and Construction Indus-try’s methods of testing structural foundations. Since introduction in 2005 with more than 2000 BDSL tests performed globally it has become well established as a reliable and cost effective method for the BDSL Bi-Directional Static Load Testing of piles.
The main features of Super Cell are :
The load-cell assembly is light weight enabling it to be more easily handled on site, it can be readily secured inside the rebar cage without the use of bearing plates.
The load-cell design utilises a much greater cross-sectional area of the pile enabling higher loads to be applied using lower hydraulic pressures.
The Ring Super-Cell ® , seen below here, is especially more suitable for Working Pile Tests where a highage of pile cross sectional area inside and outside of the cell can